落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高线电压小工作电流校正仪(耐焊弧校正仪)-(计算公式机抑制)

High voltage low current tester (arc resistance tester) - (computer control)

企业产商品编码称:耐电弧试验机

Product name: electric arc resistance tester

物品型號:NDH-A

Product model: NDH - A

充分满足原则:GB/T 1411-2002《液体绝缘层资料耐高放低直流电焊弧电流的测试》(同等IEC  61621-1997)及ASTM D495等规范的的标准来设计制作业的,并满足IEC 149、UL 746A等耐压试验手段

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

其主要适用性条件及作用:

本试验报告机是确定使中用三相电机、小家电和家里用的小家电等产业的低压电工用PVC、聚酯树脂胶胶和隔绝性电阻漆等隔绝性电阻原板材的耐电孤耐磨性综合评价,主中用无水硫酸铜隔绝性电阻原板材如:PVC、pe膜、聚酯树脂胶、云母片、工业陶瓷、玻璃钢、隔绝性电阻油、隔绝性电阻漆、纸壳等材质的耐电孤耐磨性测评;

本测试机由计算方法机操控工作,能否展示到现阶段工作环境及工作时间间隔,工作收尾后并手机截图到现阶段工作动态数据,并可印刷.规格试验检测结果。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为下上一身的结构,下处为操作使用模式,上侧为实验箱。

2 本品牌主要采用*新自动化有效控制技巧,根据选泽系统软件(IEC或ASTM)可电脑自动去试验台,并在新电脑手机上展现冲击试验的过程 和数据。

3 **效能健康,抗干涉实力强,软件测试可靠性强,精密度大。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断时出现偏差的原因:大于 ±10ms

2 调压器发热量:2kVA

3 载荷系数试验装置电流:12.5kV

4 现场实验电阻值计算精度:±3%

5 直流电的控制精确度:±10%  电流大小测量方法定位精度:1.5%

6 电极材料对试件材料压:(0.5±0.05)N

7 工业用料:钨棒

8 工业路程:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 运行自然环境的温度:(23±2)℃

10 操作学习环境气温:(50±5)%

11 电:220V±5%  50Hz  10A

12 耐压    方式 :   新国标/美标/10 mA 维持/20 mA 连续式/30 mA连续性/40 mA间断

13 试验报告执行程序下面:

程序流程段

电弧焊接电压电流

mA

电弧焊接通断准确时间s

各源程序段持续保持的时间s

疲劳试验总时光s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

反复通

60

240

5

20

不断通

60

300

6

30

反复通

60

360

7

40

多次通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

号码

种类

人数

备注栏

01

耐弧光测试英文仪

一套

 

02

探针系統

一个

 

03

工业网架支座

有一套

 

04

电原线缆

1套

 

05

一定接地放**

两支

 

06

电压电流毫安表

单台

 

07

网吧电脑测控系统

设计一套

 

08

钢材拉伸试验架

一部

 

09

工业高度条件块

2块

 

10

偏角标准规定块

2块

 

11

工业陶瓷片

2片

 

12

喷墨缩印机

1台

茶叶品牌

13

换算机

1台

国产品牌

14

安全使用讲解书

1份

 

15

完成证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 成品材质:

NDH-A    耐电弧放电检测仪-微机掌控

NDH-B    耐电孤实验设计仪-触摸屏管理

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪